Chassis
-1997 BMW 328is E36
-Full cage built and installed by Ian Madden
-APR Performance GTC 200 wing on risers
-Custom Alumibond front splitter
-Powerflex Polyurethane front control arm and rear trailing arm bushings
-Tunnel mounted CAE short shifter with heat shroud
-2 sets of wheels (tone set of Apex ARC 8)
-Wheel spacers front and rear
-Entire internal electrical harness stripped to just the wired needed for pumps, lights etc.
-Lightened doors
-Lexan rear window and rear side windows
-All sound deadening removed
-Dry weight 2475 lbs

Engine and transmission
-Original m52b28 with OBD1 conversion on intake and OBD1 red top computer
-M50 intake manifold
-Bimmerworld 3” intake boot
-Tuned for 91 octane making 203 rwhp and 188 lb-ft torque
-Porsche 3" MAF and cone intake
-Dual muffler 3” exhaust
-Race headers
-Mishimoto rad with SPAL electric fan and ducting
-Stewart water pump
-Aluminum thermostat housing
-Dual fuel pump setup
-ZF 5 speed transmission
-Bully Clutch
-Aasco lightened flywheel
-3.73 LSD diff
-Solid engine, transmission and diff carrier mounts
-Engine currently has an issue staying running probably should get a refresh of the top end
-Spare short block with balanced crank
-Spare oil filter housing with oil cooler plate for external cooler, includes lines and cooler mount

Brakes
-Manual Wildwood dual cylinder brake set up with balance bar
-Massive Brakes firewall mounted cylinder bracket uses stock pedal box
-E46 front calipers/rotors
-E36 rear calipers/rotors
-Proportion valve mounted on transmission tunnel
-Balance bar adjuster available

Suspension
-JRZ RS Pro double adjustable coil overs with external reservoirs
-600 in-lb front springs 400 in-lb rear springs
-Hotchkis adjustable front and rear sway bars (reard currently uninstalled)

Electrical
-Dash bar mounted fuse panel
-AIM Pista GPS dash external oil pressure, oil temperature and water temperature gauges
-AIM GPS antenna installed on roof
-Handheld radio harness and roof mounted antenna

Safety
-IMSA style front window defroster with 90 minute relay switch
-CoolShirt box and
-CoolShirt helmet blower fan and hose, NACA duct mounted to rear passenger side window
-Recaro floor mounted seat. Sliders are available
-6 pt Enduro race harness (expired)

Many spare parts included